In landing number 2, The height is more than 2 but the problem is the lift goes only 1 metre then stops and it's not completely at the topmost floor
Elevator haves 2 floors in my MT world.
Height is the height of the floor (from its floor level to the floor level of the next floor), not the position. Try entering 10 as the height of floor 1.
In landing number 2, The height is more than 2 but the problem is the lift goes only 1 metre then stops and it's not completely at the topmost floor Elevator haves 2 floors in my MT world.
This usually means that the heights are set wrong in the floor table. Can you share a screenshot of how you have the floor table set up?
in my mt world, floor 1 height is 1, floor 2 height is 10.
but instead going onto the topmost floor it goes only 1 metre and floor 2 position is incorrect
I turned on test then the lift doesnt go on to the top most floor.
My lift: 2 floors
Height is the height of the floor (from its floor level to the floor level of the next floor), not the position. Try entering 10 as the height of floor 1.
second floor?
I will try.
I looked at the manual
(Target Position Out of Bounds)
I set the height to 6. Now i get it.
Now i get it cheapie
I thought it was the y position
converted review into a thread
please use packages issue tracker or cdb threads for bug reports